Seamaid 502815, standard PAR56 led pool lamp, white 60 Led 13W

SeaMaid LEDINPOOL - Replacement

The PAR56 lamp is the ideal solution to replace your 300W incandescent lamp.
This universal lamp is compatible with most projectors on the market, and represents excellent value for money.

Thanks to the completely flat optics and the 120 ° diffusion angle, this lamp allows to illuminate a pool up to 10 x 5 meters in a perfectly harmonious and unobtrusive manner.

The SeaMaid lamps are compatible on existing niches PAR56.
ABS shell with screw terminal molded into the body.
Polycarbonate lens ultrasonically welded.

60 led SeaMaid pool light. Color: cold white. 
With universal standard connection PAR 56 and new flat optic.
Suitable for replacing old 300W halogen lamps.

The firing order is done from the main control panel of the pool.

PS: this lamp is the new 2019 version that replaces the old standard lamps on/off 60 white leds (code 501115) of the previous years.

This pool light combines ease of installation and use with the high quality of Seamaid products.
This is possible thanks to careful analysis and the constant evolution of production systems, which aim to satisfy the needs of the consumer more and more.

FOR ALL EXISTING POOLS: the SEAMAID LED PAR56 LED lamps are standard and can replace all existing PAR56 lamps, regardless of the brand of the lighthouse.

FOR SWIMMING POOLS TO BE CARRIED OUT: the cable with a cross section 2 × 1.5 mm is enough to realize the electrical installation of the transformer and the lamp, with a financial gain important in the face of the price of the lamp.
This lamp allows you to use the transformers smaller therefore less expensive and consume less.
Very easy to install and use. It is practically indestructible (made of ABS and polycarbonate). The outer lens ultrasonically welded ensures a perfect seal.

Resistant: A polycarbonate injection gives the lamp a very high resistance to shocks, heat and chemical reactions with water treatment products. Two built-in screw-in terminals guarantee the strength of the 12V power cable connection.
Reliable and safe: pool light developed specifically for aquatic lighting. Allows to obtain a homogeneous and harmonious light distribution. It is not dangerous or annoying to the eyes.
Economical: The LED light allows major savings, both for users (energy efficiency) and professionals, when constructing a pool. A 2x1.5mm² cable connected to a 20W protected toroidal transformer is sufficient for installing a SeaMAID PAR56 lamp. This allows for savings on materials and labor.


SPECIFICATIONS:

• Color temperature: cold white 6500k
• Number of LEDs: 60 LED
• Programs: 1 fixed color
• Switching on/off: on / off
• Luminous efficiency: 1450 lm
• V. / Hz .: ~12v / 50-60Hz
• Power: 13,5 W
• Ra / CRI:> 70
• Lighting range: 120 °
• Energy class: A +
• Insulation class: CLASS III
• Degree of protection: IP68 (1m)
• LED life:> 10 000 h
• On / Off cycles:> 100,000
• Use: only for underwater use
• Material: polycarbonate
• Cable connection: 2 screw terminals
• Dimension: 178 mm

Warranty: 3 year (must be activated online)

INSTALLATION RECOMMENDATIONS:

• Always check that the connection of the power cables of the spotlight is perfectly waterproof. When replacing a PAR56 lamp, always change the headlight joint that has overheated and deformed.

• Always use connectors that ensure optimal contact of the electrical cables. Check that the connection is perfectly waterproof by favoring IP68 connectors or by adding insulating gel in the connection box.

• Always connect a pool spotlight to a double coil insulating safety transformer, the output voltage must be 12 Volts. In case of unstable secondary voltage or higher than the standard tolerances, it is essential to install a stabilization and / or limiting instrument upstream of the electrical panel.

• These pool lamps must be connected to a two-coil insulated safety transformer that is at least 20% more powerful then the total absorber power.
  Upon assembly, it is necessary to lubricate (lubricating tube provided) the rear part of the lamp to allow easier fixing of the waterproof bell and to change the sheath of the latter if already used.