Seamaid 502860 Universal flat led pool projector PAR56 60 Led White 13W

SeaMaid LEDINPOOL - Construction

Universal flat projector without niche, compatible with any type of pool and any structure, it can be installed simply by screwing it on a wall loop with 1 "½ connection.
Light up your pool to make your bath in the pool safe and comfortable even at night!
The SeaMAID flat projector is ideal for new pools equipped with a PVC liner in which a PAR56 type lighthouse could create watertight problems.

SeaMaid LED pool lamp without niche, with new flat optics and 60 cold white LEDs.

Suitable to be installed during the construction of new pools.

The passage of the cable takes place inside the through-wall up to the junction box, with a total watertight seal.
ABS base to screw through the wall.

It is possible to buy the complete throught-the-wall kit separately -> SEE RELATED PRODUCTS


PS: this projector is the new version which replaces all the old white on / off projectors (code 501160) of previous years.

Resistant: A polycarbonate injection gives the lamp a very high resistance to shocks, heat and chemical reactions with water treatment products.
Reliable and safe: pool lamp developed specifically for aquatic lighting. Allows to obtain a homogeneous and harmonious light distribution. It is not dangerous or annoying to the eyes.
Economical: The LED light allows major savings, both for users (energy efficiency) and professionals, when constructing a pool. A 2x1.5mm² cable connected to a 20W protected toroidal transformer is sufficient for installing a SeaMAID PAR56 lamp. This allows for savings on materials and labor.


SPECIFICATIONS:

• Color temperature: cold white 6500k
• N. of LEDs: 60
• Programs: 1 fixed color
• Power on / off: on / off
• Luminous efficiency: 1450 lm
• V. / Hz .: ~12v / 50-60Hz
• Power: 13 W
• Ra / CRI:> 70
• Lighting range: 120 °
• Energy class: A +
• Insulation class: CLASS III
• Degree of protection: IP68 (1m)
• LED life:> 10,000 hours
• On / Off cycles:> 100,000
• Use: only for underwater use
• Materials: polycarbonate support and optics (PC)
• Cable: HO7RNF 2m, 2x1.5mm²
• Connection: 2 metal screw terminals

Warranty: 3 year (must be activated online)

• Low energy consumption
• Saves work during installation
• Long lifespan
• No risk of overheating
• No risk to eyes
• Safe for children
• Easy to install, and easy to use
• TUV certified

Easy to install: Having a 1.5 "male thread as a fastening system, no specific tool is needed for installation. All you need is a 1.5 ”suction nozzle and manually screw the rear part of the flat headlight. The power cable that passes through the nozzle must reach a junction box by means of a hermetic sheath (lighting kit supplied with 2 meters of HO7RNF 2 × 1.5 mm² cable) and with a special installation kit.

N.B.: These swimming pool lamps must be connected to an insulating safety transformer with double coil with a power greater than at least 20% of the total absorbed power.