RGB Led Light | Mini projector for pools, Seamaid 36 Led 7 W

MINI PROJECTOR to screw into a 1,5" vacuum fitting
Light up your evening with this pool lamp!
The seamaid mini projector is compatible with all types of pools.
It is specifically designed to light up specific areas of the pool such as immersed beaches, steps, and overflow features during construction.
It can also be fitted into above ground pools.

To add splashes of colour to your pool, this projector has 11 colours and 5 automatic programs.
The exclusive SeaMAID optic lens brings out a harmonious blend of colours.
It is controlled by turning the power on/off at the pool’s general electric panel.

Depending on the type of swimming pool (steel wall or cement wall or above ground) on which the mini projector will be installed, three versions of pass-through wall kits are available -> SEE RELATED PRODUCTS

Resistant: A polycarbonate injection gives the lamp a very high resistance to shocks, heat and chemical reactions with water treatment products.
Reliable and safe: pool lamp developed specifically for aquatic lighting. Allows to obtain a homogeneous and harmonious light distribution. It is not dangerous or annoying to the eyes.
Economical: The LED light source allows you to save a significant amount of energy during use.

Easy to install: Having a 1.5 "male thread as a fastening system, no specific tool is needed for installation. All you need is a 1.5 ”suction nozzle and manually screw on the projector. The power cable that passes through the nozzle must reach a junction box by means of a hermetic sheath (lighting kit supplied with 2 meters of HO7RNF 2 × 1.5 mm² cable) and with a special installation kit.
For the installation of this pool lamp it is recommended to wrap the excess cable in the junction box, so that in the future the projector can be replaced out of the water.

SPECIFICATIONS:

• Color temperature: Multi colour RGB
• Number of LEDs: 36
• Programs: 11 colours and 5 sequences
• Control: On / Off
• Luminous efficiency: 223lm / full rgb
• V. / Hz.: ~12v / 50-60Hz
• Power: 7W
• Illumination beam: 120°
• Energetic class: A++
• Insulation class: CLASS III
• Degree of protection: IP68 (1m)
• Dimensions: 125 mm

Ideal for new installations, a single projector illuminates the pool evenly up to 5 meters, without dazzling bathers.
It is controlled by the swimming pool electrical panel.

• Low energy consumption
• Saves work during installation
• Long lifespan
• No risk of overheating
• No risk to eyes
• Safe for children
• Easy to install, and easy to use
• TUV certified
• Warranty: 3 year (must be activated online)

N.B.: These swimming pool lamps must be connected to an insulating safety transformer with double coil with a power greater than at least 20% of the total absorbed power.