Seamaid 502655 PAR56 Ecoproof led pool lamp 60 white Led 13W

SeaMaid LEDINPOOL - Renovation

PAR56 Ecoproof Led lamp with new watertight technology and new flat optic with high luminous performances.
The lamp is suitable for the renovation of swimming pools whose headlight in ABS has been damaged.

Compatible with any niche thanks to the special adapter kit (available separately).

Lamp for swimming pool SeaMaid LED PAR56 Ecoproof with new flat optics and 60 LEDs cold white.

Suitable for the renovation of swimming pool lights whose old ABS projector has been damaged or the spare parts are no longer available.

Equipped with a rear connecting chamber, PAR56 SeaMAID Ecoproof lamp is 100% waterproof.

PS: this lamp is the new version that replaces the old ecoproof lamps on/off 30 white leds (code 502204) of the previous years.

Renew each pool light to never stop enjoying a refreshing bath at all times, even at night!

This lamp allows to illuminate a pool up to 10 x 5 meters in a perfectly harmonious and unobtrusive manner.

To fasten this new lamp to the crown of the projector, simply screw on the supplied brackets. This allows for labor and material savings, thanks also to:

• Elimination of the back
• Eliminating the joint
• Removal of the cable gland
• Reduction of the number of screws in stainless steel

On existing pools, it is possible to install the lamp without necessarily replacing the niche by purchasing the lighthouse niche adapter kit (consisting of an ABS crown, three adjustable metal tabs and screws) making the universal solution.

To allow installation in almost all niches in the market, each ECOPROOF lamp is supplied complete with 4 brackets + 4 M5x20 nylon screws to guarantee the perfect maintenance of the lamp in the original crown of the projector.


Resistant: A polycarbonate injection gives the lamp a very high resistance to shocks, heat and chemical reactions with water treatment products. Two built-in screw-in terminals guarantee the strength of the 12V power cable connection.

Reliable and safe: pool light developed specifically for aquatic lighting. Allows to obtain a homogeneous and harmonious light distribution. It is not dangerous or annoying to the eyes.
Development of the lamp body with modification to the connectors to also allow an insulation with resin and rear cap with special for high frequency welding.

Economical: The LED light allows major savings, both for users (energy efficiency) and professionals, when constructing a pool. A 2x1.5mm² cable connected to a 20W protected toroidal transformer is sufficient for installing a SeaMAID PAR56 lamp. This allows for savings on materials and labor.



SPECIFICATIONS:

• Color temperature: cold white 6500k
• N. of LEDs: 60
• Programs: 1 fixed color
• Power on / off: on / off
• Luminous efficiency: 1450 lm
• V. / Hz.: ~12v / 50-60Hz
• Power: 13 W
• Ra / CRI:> 70
• Lighting range: 120 °
• Energy class: A +
• Insulation class: CLASS III
• Degree of protection: IP68 (1m)
• LED life:> 10,000 hours
• On / Off cycles:> 100,000
• Use: only for underwater use
• Materials: cutting, optics and polycarbonate plug-in (PC). Nylon nut (PA).
• Connection: 2 metal screw terminals
• 3 gaskets for cable section 7, 9 and 13 mm
• Dimension: 178 mm

INSTALLATION RECOMMENDATIONS:
These pool lamps must be connected to a two-coil insulated safety transformer that is at least 20% more powerful than the total absorbed power.

If your headlight body is in good condition and you simply need to replace the old PAR56 lamp then we advise you to buy the SeaMaid STANDARD PAR56 lamp cod. 502815 (white led) or cod. 502839 (RGB with remote control) ---> SEE RELATED ARTICLES